The rail of EH-DIN-75 from the Electro House company is intended by DIN for fast installation on it different types of a modular elketrooborudovaniye, such as to UZO, DIF automatic machines, time cut-outs, etc. in electric boards, installation boxes, electric cabinets. But possibilities of use of this device are not limited to it, also on it it is possible to fix jumpers, buses, electric sockets, electric counters and many other things. This device incredibly simple, and therefore reliable. Thanks to the form, by the form the DIN profile of a rail reminds a rail, she received one more name - a DIN rail. Thanks to this device mounting of modular electric equipment is incredibly fast and does not demand additional tools - it is just latched on a DIN rail that much quicker and more conveniently than when using screw fastening. Only a couple of seconds is required for installation of one module. And service of an electric board becomes much safer, more comfortably and quicker - besides, it is not necessary to turn off screws for detachment of the device. For this purpose it is required to shift the fixer of the device in a bottom and to remove the device from DIN of a rail that too will take no more than a couple of seconds. Besides, the vast majority of modern modular electric equipment is adapted for installation on DIN a rail and it is not necessary to look for something special. Structurally DIN the rail represents a metal profile of irregular shape with perforation on all length intending for mounting of DIN of a rail on a surface by means of screws or self-tapping screws. It is made of zinc carbon steel. It can be operated at a temperature from-60 to 60 ° C with an average of a relative humidity of no more than 90%. This DIN model of a rail has length of 75 mm. and thickness of 0.9 mm. Height - 7.5 mm. Width - 35 mm. Has 3 openings for fastening of 20х6.5 mm in size. Treats type Ω. This device simple, reliable and comfortable in operation also conforms to the world and European quality standards.